{
  "global": {
    "selected": "Selected",
    "save": "Save",
    "ok": "Ok",
    "language": "Language",
    "temperatureFormat": "Temperature Unit",
    "decimalSeparator": "Decimal Separator",
    "dateFormat": "Date Format",
    "timeFormat": "Time Format",
    "timezone": "Timezone",
    "date": "Date",
    "time": "Time",
    "ipAddress": "IP Address",
    "dhcp": "DHCP",
    "hostname": "Hostname",
    "subnetMask": "Subnet Mask",
    "standardGateway": "Standard Gateway",
    "noEthernet": "Not connected to Ethernet",
    "calibration": "Calibration Date",
    "calibrationDueDate": "Calibration Due Date",
    "serialNumber": "Serial Number",
    "serialNr": "Serial Nr.",
    "software": "Software",
    "license": "License",
    "licenseKey": "License Key",
    "licenseValidation": "License Validation",
    "validUntil": "Valid until",
    "osVersion": "System Version",
    "softwareVersion": "Firmware Version",
    "controllerVersion": "Controller Version",
    "softwareUpdate": "Software Update",
    "runUpdate": "Run Update",
    "validateKey": "Validate Key",
    "namingScheme": "Naming Scheme",
    "defaultnamingScheme": "Default Naming Scheme",
    "cancel": "Cancel",
    "confirm": "Confirm",
    "append": "Append",
    "login": "Login",
    "dateAndTime": "Date & Time",
    "dateAndTimeformat": "Date & Time Format",
    "location": "Location",
    "settings": "Settings",
    "version": "Version",
    "selectProfile": "Select Profile",
    "remoteAccess": "Remote Access",
    "retry": "Retry",
    "reload": "Reload",
    "activate": "Activate",
    "reporting": "Reporting",
    "csvSeparator": "CSV Field Separator",
    "remoteAccessCode": "Fixed Access Code",
    "logging": "Logging",
    "logFiles": "Log files",
    "logFileLocation": "Log file location",
    "emptyList": "No entries",
    "emptySearch": "No entries found",
    "testMethods": "Test Methods",
    "clearAll": "Clear all",
    "apply": "Apply",
    "restarting": "Restarting",
    "search": "Search",
    "nameplate": "Nameplate",
    "general": "General",
    "tapControl": "Tap Control",
    "tapChanger": "Tap Changer",
    "electricalValues": "Electrical Values",
    "windings": "Windings",
    "basic": "Basic",
    "temperatureCoefficient": "Temperature Coefficient",
    "tap": "Tap",
    "tapChangerTiming": "Tap Changer Timing",
    "primary": "Primary",
    "secondary": "Secondary",
    "tertiary": "Tertiary",
    "type": "Type",
    "taps": "Taps",
    "noTaps": "No Taps",
    "vector": "Vector",
    "detect": "Detect",
    "info": "Info",
    "error": "Error",
    "inspections": "Inspections",
    "manufacturer": "Manufacturer",
    "model": "Model",
    "yearBuilt": "Year Built",
    "serialNumberShort": "S/N",
    "maxRatedPower": "Max Rated Power",
    "remarks": "Remarks",
    "referenceTemperature": "Reference Temp.",
    "changeTapForwardTime": "Max Transition",
    "pulseDurationLabel": "Pulse Duration",
    "recoveryTimeInSeconds": "Recovery Time",
    "generationWizard": "Generation Wizard",
    "label": "Label",
    "labels": "Labels",
    "voltage": "Voltage",
    "ratedVoltage": "Rated Voltage",
    "ratedVoltages": "Rated Voltages",
    "firstTap": "First Tap",
    "lastTap": "Last Tap",
    "clone": "Clone",
    "delete": "Delete",
    "totalTests": "Tests Total",
    "priSec": "Pri:Sec",
    "priTer": "Pri:Ter",
    "edit": "Edit",
    "rename": "Rename",
    "noInspections": "None",
    "warningDetectionRunning": "Warning: Detection running",
    "sn": "S/N",
    "noItems": "None",
    "winding": "Winding",
    "current": "Current",
    "step": "Step",
    "detected": "Detected",
    "graph": "Graph",
    "results": "Results",
    "testPlan": "Testplan",
    "name": "Name",
    "weather": "Weather",
    "tests": "Tests",
    "template": "Template",
    "templateFrom": "Template from",
    "runTest": "Run Test",
    "start": "Start",
    "stop": "Stop",
    "exportLogs": "Export Logs",
    "export": "Export",
    "create": "Create",
    "createYourFirstTemplate": "Create your first template",
    "createYourFirstTestObject": "Create your first test object",
    "warningCurrentIsFlowing": "WARNING: Current is flowing",
    "warningMeasurementIsRunning": "WARNING: Measurement is running",
    "warningVoltageIsApplied": "WARNING: Voltage is applied ",
    "maxError": "Max Error",
    "off": "Off",
    "t1": "T1",
    "t2": "T2",
    "t3": "T3",
    "t4": "T4",
    "t5": "T5",
    "tExternal": "External",
    "probes": "Probes",
    "externalTemperature": "External Temp.",
    "hSideCurrent": "H-Side Current",
    "xSideCurrent": "X-Side Current",
    "hxCurrent": "HX Current",
    "enabled": "Enabled",
    "stabilityCondition": "Stability Condition",
    "maximumDeviation": "Maximum Deviation",
    "createTemplate": "Create Template",
    "next": "Next",
    "createTestObject": "Create Test Object",
    "continuous": "Continuous",
    "deleteAndCreateNew": "Delete & Create",
    "print": "Print",
    "resultsFor": "Results for",
    "open": "Open",
    "hSide": "H-Side",
    "xSide": "X-Side",
    "customTemperatureCoefficient": "Coefficient",
    "pdf": "Pdf",
    "enter": "Enter",
    "filtered": "Filtered",
    "serviceCode": "Service Code",
    "lockedInRemote": "Locked in Remote-Access",
    "invalidInspection": "None",
    "startTimer": "Timer start",
    "isAutomatic": "Automatic",
    "automatic": "Automatic",
    "manual": "Manual",
    "no": "No",
    "yes": "Yes",
    "hour": "{{hours}} hour",
    "hours": "{{hours}} hours",
    "minute": "{{minutes}} min",
    "second": "{{seconds}} sec",
    "ignore": "Ignore",
    "duplicate": "Duplicate",
    "download": "Download",
    "live": "Live",
    "customTestVoltage": "Test Voltage",
    "phaseAConnection": "Phase A Connection",
    "phase": "Phase {{phase}}",
    "custom": "Custom",
    "phaseShifterVector": "Vector",
    "loading": "Loading...",
    "phaseShifting": "Phase Shifting",
    "average": "Average",
    "using": "Using",
    "temperature": "Temperature",
    "device": "Device",
    "yours": "Yours",
    "opperationSuccessfull": "Operation successful."
  },
  "home": {
    "newTestObjectTitle": "New blank test object",
    "newTestObjectFromTemplateTitle": "New test object from template",
    "recentTestObjectsTitle": "Recent",
    "noStarredTemplate": "No starred templates",
    "noRecentTestObject": "No recent test object"
  },
  "archive": {
    "yourTestObjectsTitle": "Your Test Objects"
  },
  "templates": {
    "yourTemplatesTitle": "Your Templates"
  },
  "profileSelection": {
    "remoteAccess": {
      "disabled": "Enable remote access in the settings",
      "enabled": "Connect your mini-ATOS to a network or device and activate remote access.",
      "activated": {
        "static": "Remote access activated, enter your code on your device to gain access.",
        "random": "Remote access activated, enter code below on your device to gain access."
      }
    }
  },
  "login": {
    "sessionActive": "Another client is already connected.",
    "credentialsInvalid": "Invalid code",
    "remoteAccessDisabled": "Remote access disabled",
    "tooManyRequests": "Too many requests. Please wait a few minutes before trying again",
    "lostConnection": "Connection has been lost. Trying to reconnect...",
    "cantConnect": "Connection could not be established. Trying to connect...",
    "noConnection": "Connection could not be established.",
    "connecting": "Connecting...",
    "loading": "Loading..."
  },
  "languages": {
    "english": "English",
    "en": "English",
    "german": "German",
    "de": "German"
  },
  "temperature": {
    "celsius": "Celsius [°C]",
    "fahrenheit": "Fahrenheit [°F]"
  },
  "namingScheme": {
    "iec": "IEC",
    "ansi": "ANSI",
    "abcn": "ABCN",
    "custom": "Custom"
  },
  "windings": {
    "0": {
      "long": "Primary",
      "short": "Pri"
    },
    "primary": "Primary",
    "1": {
      "long": "Secondary",
      "short": "Sec"
    },
    "secondary": "Secondary",
    "2": {
      "long": "Tertiary",
      "short": "Ter"
    },
    "tertiary": "Tertiary",
    "both": "Dual Supply"
  },
  "mainMenu": {
    "home": "Home",
    "templates": "Templates",
    "archive": "Archive",
    "ejectUsb": "Eject USB",
    "settings": "Settings",
    "logout": "Log out"
  },
  "settingsMenu": {
    "dateAndTime": "Date & Time",
    "regional": "Regional",
    "networking": "Networking",
    "namingScheme": "Naming Scheme",
    "system": "System Info",
    "remoteAndService": "Remote & Service",
    "deviceSettings": "Device Settings",
    "maintenance": "Maintenance",
    "service": "Service",
    "reporting": "Reporting",
    "remote": "Remote Access",
    "license": "License",
    "logs": "Logs",
    "manual": "Manual"
  },
  "errors": {
    "general": "Functionality may be limited.",
    "unknown": "Unknown error occurred.",
    "overheating": "Device is overheated.",
    "emergencyStop": "Emergency stop is pressed.",
    "clampDisconnected": "Clamp is disconnected.",
    "fanBlocked": "Fan is blocked.",
    "fanDisconnected": "Fan is disconnected.",
    "unsafe": "Device unsafe.",
    "graphDataMissing": "Error loading Graph!"
  },
  "testObjects": {
    "Unknown": "Unknown",
    "PowerTransformer": "Power Transformer",
    "Resistance": "Resistance",
    "CurrentTransformer": "Current Transformer",
    "AutoTransformer": "Auto Transformer",
    "PhaseShiftingTransformer": "Phase Shifting Transformer"
  },
  "measurementMethods": {
    "WindingResistanceInterval": {
      "short": "WRI",
      "long": "WR Interval",
      "card": "WR Interval"
    },
    "WindingResistance": {
      "short": "WR",
      "long": "Winding Resistance",
      "card": "Winding Resistance"
    },
    "WindingResistanceAuto": {
      "short": "WR",
      "long": "Winding Resistance",
      "card": "Winding Resistance"
    },
    "Demagnetization": {
      "short": "DM",
      "long": "Demagnetization",
      "card": "Demagnetization"
    },
    "TurnsRatio": {
      "short": "TR",
      "long": "Turns Ratio",
      "card": "Turns Ratio"
    },
    "MagneticBalance": {
      "short": "MB",
      "long": "Magnetic Balance",
      "card": "Magnetic Balance"
    },
    "ShortCircuitImpedance": {
      "short": "SCI",
      "long": "Short Circuit Impedance",
      "card": "Short Circuit Impedance"
    },
    "DynamicResistanceMeasurement": {
      "short": "DRM",
      "long": "Dynamic Resistance Measurement",
      "card": "Dynamic Resistance"
    },
    "FrequencyResponseOfStrayLosses": {
      "short": "FRSL",
      "long": "Frequency Response Of Stray Losses Measurement",
      "card": "FRSL"
    },
    "TurnsRatioPst": {
      "short": "TR",
      "long": "Turns Ratio",
      "card": "Turns Ratio"
    },
    "WindingResistancePst": {
      "short": "WR",
      "long": "Winding Resistance",
      "card": "Winding Resistance"
    },
    "HeatRunTest": {
      "short": "HRT",
      "long": "Heat Run Test",
      "card": "Heat Run Test"
    }
  },
  "language": {
    "english": "English",
    "german": "German"
  },
  "fileExplorer": {
    "fileName": "Name",
    "renameFile": "Rename File",
    "noDrivesConnected": "No external USB drives detected",
    "createDirectory": "Create Directory",
    "import": "Select File to Import"
  },
  "tapChangerType": {
    "None": "None",
    "DETC": "DETC",
    "OLTC": "OLTC"
  },
  "tapCountConfigurator": {
    "title": {
      "0": "Primary",
      "1": "Secondary",
      "2": "Tertiary"
    }
  },
  "voltageLabelWizard": {
    "title": "Labels Wizard",
    "labelingScheme": "Labeling pattern",
    "changeOverScheme": "Changeover suffix",
    "preview": "Preview",
    "offset": "Offset",
    "changeOverSchemes": {
      "None": "-",
      "AB": "a b",
      "ABC": "a b c",
      "Quote": " ' ''",
      "DoubleQuote": "' '' '''"
    },
    "labelingSchemes": {
      "None": "1,2,3",
      "S101": "-1,0,+1",
      "RNL": "1R,N,1L",
      "LNR": "1L,N,1R"
    }
  },
  "voltageWizard": {
    "title": "Rated Voltages Wizard",
    "calculationMethod": "Calculation Method",
    "modes": {
      "firstLast": "First/Last",
      "refTapStep": "RefTap/Step"
    },
    "roundTo": "Round to",
    "noChangeOver": "No Changeover",
    "changeOverPositions": "Changeover Positions",
    "step": "Step",
    "direction": {
      "up": "Up",
      "down": "Down"
    },
    "stepType": {
      "voltage": "Voltage",
      "percentage": "Percentage"
    },
    "refTap": "Ref Tap",
    "ratedVoltage": "Rated Voltage"
  },
  "phaseDetection": {
    "start": "Start",
    "stop": "Stop",
    "runDetection": "Run detection",
    "text": "Vector group of transformer most likely is:",
    "noCandidates": "Vector group could not be determined",
    "title": "Detect Vector Group"
  },
  "phaseShiftDetection": {
    "start": "Start",
    "stop": "Stop",
    "runDetection": "Run detection",
    "text": "Phase shifting angle most likely is:",
    "noCandidates": "Phase shifting angle could not be determined",
    "title": "Detect Phase Shifting Angle"
  },
  "transformerDetect": {
    "start": "Start",
    "stop": "Stop",
    "title": "Winding Configuration Autodetect",
    "noCandidates": "Detect Configuration",
    "actual": "Actual Configuration",
    "invalidTestObject": "No configuration found, please check your configuration and test object type",
    "phaseShift": "No configuration found, your test object is either a Phase Shifting Transformer or a Transformer with a Phase Shift of {{angle}}°"
  },
  "inspections": {
    "measurementMethods": "Measurement Methods"
  },
  "inspection": {
    "settings": {
      "title": "Inspection Information"
    }
  },
  "demag": {
    "steps": {
      "Fine70A": "Very Fast (8 steps)",
      "Fine80A": "Fast (10 steps)",
      "Fine85A": "Medium (12 steps)",
      "Fine90A": "Fine (15 Steps)",
      "Fine95A": "Very Fine (20 Steps)"
    },
    "currents": {
      "A0005": "0.05A",
      "A0010": "0.1A",
      "A0020": "0.2A",
      "A0050": "0.5A",
      "A0100": "1.0A",
      "A0200": "2.0A",
      "A0500": "5.0A",
      "A0750": "7.5A",
      "A1000": "10A",
      "A1500": "15A",
      "A2000": "20A",
      "A2500": "25A",
      "A3000": "30A"
    },
    "pstConnections": {
      "Dd0D12": "A: H1-H2 / B:H2-H3 / C: H3-H1",
      "Dd0D13": "A: H1-H3 / B:H2-H1 / C: H3-H2",
      "Yy0": "A: H1-H23 / B:H2-H31 / C: H3-H12"
    },
    "pstConnection": "Connections",
    "timeElapsed": "Time Elapsed",
    "cycle": "Step",
    "resistance": "Resistance",
    "magneticFlux": "Actual Mag. Flux",
    "iexci": "Actual Current",
    "initialRem": "Initial Rem. Flux",
    "endRem": "Final Rem. Flux",
    "maxFlux": "Saturation Flux",
    "maxRFlux": "Max. Rem. Flux",
    "results": "Results",
    "graph": "Graph",
    "symbSai": "Ψ",
    "symbFlux": "Ф",
    "symbRemanent": "rem",
    "symbSaturation": "sat",
    "symbInitial": "init",
    "symbFinal": "final",
    "symbActual": "act",
    "symbCurrent": "I",
    "startcurrent": "Start Current",
    "numberOfSteps": "Number of Steps",
    "settings": {
      "title": "Settings DM"
    }
  },
  "measurementMode": {
    "A": "A",
    "B": "B",
    "C": "C",
    "ABC": "ABC",
    "Taps": "Go Taps"
  },
  "phase": {
    "PhaseNeutral": "Phase-Neutral",
    "PhasePhase": "Phase-Phase"
  },
  "wrSettingsMenu": {
    "mainSettings": "Main Settings",
    "temperatures": "Temperatures",
    "advanced": "Advanced",
    "hSideWarning": "H-side current higher than {{maxWrHSide}}A will only be applied in primary mode. Otherwise it will be limited to {{maxWrHSide}}A."
  },
  "remoteAccess": {
    "enable": "Enable",
    "generateCode": "Generate Random Access Code",
    "enableOnStartup": "Activate On Start",
    "logout": {
      "title": "Logged out",
      "message": "You have been logged out from the device."
    }
  },
  "inspectionSelection": {
    "message": "There are multiple inspections with test plans for the test object. Please choose which inspection to copy the test plans from.",
    "inspections": "Inspections"
  },
  "turnsRatio": {
    "testVoltage": "Test Voltage",
    "maxError": "Max Error",
    "primaryTap": "Primary Tap",
    "secondaryTap": "Secondary Tap",
    "valueModes": {
      "tr": "TR",
      "vr": "VR"
    },
    "exp": "Exp.",
    "ratedVoltage": "Rated V",
    "settings": {
      "title": "Settings TR"
    }
  },
  "trpst": {
    "testVoltage": "Test Voltage",
    "maxError": "Max Error",
    "primaryTap": "Primary Tap",
    "secondaryTap": "Secondary Tap",
    "valueModes": {
      "tr": "TR",
      "vr": "VR"
    },
    "exp": "Exp.",
    "ratedVoltage": "Rated V",
    "settings": {
      "title": "Settings TR"
    }
  },
  "voltageAutoDetect": {
    "title": "Auto Detect Voltage",
    "text": "Optimal voltage for measurement is:",
    "noResult": "Voltage could not be determined",
    "start": "Start",
    "stop": "Stop",
    "runDetection": "Run Detection"
  },
  "windingResistance": {
    "viewTypes": {
      "bothSides": "Dual Supply"
    },
    "corrected": "Corrected",
    "dev": "Dev",
    "settings": {
      "title": "Settings WR",
      "continuousMode": "Continuous Mode",
      "continuousModes": {
        "onRequest": "On Request",
        "always": "Always"
      },
      "custom": {
        "hSideCurrent": "H-Side Current",
        "xSideCurrent": "X-Side Current"
      },
      "magnetizationPattern": "Magnetization Pattern",
      "magnetizationPatterns": {
        "Optimized": "Three Legs",
        "NotOptimized": "Five Legs"
      }
    }
  },
  "wrpst": {
    "hSideLabel": "H-Side",
    "xSideLabel": "X-Side",
    "testCurrent": "Test Current",
    "corrected": "Corrected",
    "dev": "Dev",
    "settings": {
      "title": "Settings WR",
      "continuousMode": "Continuous Mode",
      "continuousModes": {
        "onRequest": "On Request",
        "always": "Always"
      },
      "custom": {
        "hSideCurrent": "H-Side Current",
        "xSideCurrent": "X-Side Current",
        "hxCurrent": "HX Current"
      },
      "magnetizationPattern": "Magnetization Pattern",
      "magnetizationPatterns": {
        "Optimized": "Three Legs",
        "NotOptimized": "Five Legs"
      },
      "menu": {
        "mainSettings": "Main Settings",
        "temperatures": "Temperatures",
        "advanced": "Advanced",
        "hSideWarning": "H-side current higher than {{maxWrHSide}}A will only be applied in primary mode. Otherwise it will be limited to {{maxWrHSide}}A."
      }
    }
  },
  "hrt": {
    "settings": {
      "title": "Settings HRT",
      "hSideTaps": "H-Side Taps",
      "xSideTaps": "X-Side Taps",
      "measurementInterval": "Measuring Interval",
      "measurementCount": "Measuring Points",
      "minDuration": "Min. Duration",
      "measuring": "Measuring",
      "hSideMeasuring": "H-Side",
      "xSideMeasuring": "X-Side",
      "phase": "Phase",
      "connectionAlternative": "Connection",
      "customMeasurementInterval": "Interval in s",
      "customMeasurementPoints": "Points",
      "fixTimeInterval": "Fix Interval Time",
      "supplyMode": "Supply Mode",
      "disabledInTestPlanPage": "Locked in Tesplan Page",
      "missingTempProbes": "No probes selected.",
      "analysis": {
        "rRef": "Reference Measurement",
        "skipDataPoints": "Skip Datapoints",
        "oilTempModel": "Oil Temp. Model",
        "tStart": "θt=0",
        "tEnd": "θt=end",
        "ecm": "θecm",
        "oilTempModelItems": {
          "None": "None",
          "Constant": "Constant",
          "Linear": "Linear",
          "Exponential": "Exponential",
          "TemperatureProbe": "Temp. Probes"
        }
      },
      "menu": {
        "mainSettings": "Main Settings",
        "intervalSettings": "Time Intervals",
        "reference": "Reference",
        "analysis": "Analysis"
      },
      "intervals": {
        "5000": "Every 5s",
        "10000": "Every 10s",
        "60000": "Every 1min"
      },
      "measurementDurations": {
        "60000": "1",
        "600000": "10",
        "1200000": "20"
      },
      "tempProbeConfirmationDialog": {
        "title": "Confirm Disable Probe",
        "message": "This temperature probe is being used in the analysis, do you want to disable and remove it from the analysis?"
      }
    },
    "tap": "Tap: {{tap}}",
    "table": {
      "time": "Time",
      "primary": "Phase {{phase}}: {{connection}}, Tap {{tap}}",
      "secondary": "Phase {{phase}}: {{connection}}, Tap {{tap}}",
      "Tavg": "TAvg",
      "tOil": "θom"
    }
  },
  "shortCircuitImpedance": {
    "corrected": "Corrected",
    "primary": "Primary",
    "missingTapVoltage": "missing kV",
    "tap": "Tap",
    "autoVoltage": "Auto",
    "settings": {
      "title": "Settings SCI",
      "testVoltage": "Test Voltage",
      "testFrequency": "Test Frequency",
      "basePower": "Base Power (Sbase)",
      "basePowerShort": "Base Power",
      "continuousMode": "Continuous Mode",
      "continuousModes": {
        "onRequest": "On Request",
        "always": "Always"
      },
      "menu": {
        "mainSettings": "Main Settings",
        "temperatures": "Temperatures",
        "advanced": "Advanced"
      }
    },
    "table": {
      "phase": "Phase",
      "impedance": "Zm",
      "resistance": "Rm",
      "reactance": "Xm",
      "deviation": "Deviation",
      "Tavg": "Tavg",
      "zsc": "Zsc calc [Ω]",
      "ecc": "Zsc calc [%]",
      "noData": "Base power and rated voltage required to calculate data"
    }
  },
  "windingResistanceInterval": {
    "settings": {
      "title": "Settings WRI",
      "hSideTaps": "H-Side Taps",
      "xSideTaps": "X-Side Taps",
      "measurementInterval": "Measuring Interval",
      "measurementCount": "Measuring Points",
      "minDuration": "Min. Duration",
      "measuring": "Measuring",
      "hSideMeasuring": "H-Side",
      "xSideMeasuring": "X-Side",
      "phase": "Phase",
      "connectionAlternative": "Connection",
      "customMeasurementInterval": "Interval in s",
      "customMeasurementPoints": "Points",
      "fixTimeInterval": "Fix Interval Time",
      "supplyMode": "Supply Mode",
      "menu": {
        "mainSettings": "Main Settings",
        "intervalSettings": "Time Intervals",
        "temperatures": "Temperatures"
      },
      "intervals": {
        "5000": "Every 5s",
        "10000": "Every 10s",
        "60000": "Every 1min"
      },
      "measurementDurations": {
        "60000": "1",
        "600000": "10",
        "1200000": "20"
      }
    },
    "tap": "Tap: {{tap}}",
    "table": {
      "time": "Time",
      "primary": "Phase {{phase}}: {{connection}}, Tap {{tap}}",
      "secondary": "Phase {{phase}}: {{connection}}, Tap {{tap}}",
      "Tavg": "TAvg"
    }
  },
  "wrAuto": {
    "measurementView": {
      "corrected": "Corrected",
      "viewType": "{{measure}} ({{tapChanger}})",
      "measureTypes": {
        "RSerie": "Rs",
        "RCommon": "Rc",
        "RInline": "Ri",
        "RH": "RH",
        "RHX": "RHX",
        "RX": "RX",
        "None": "–"
      },
      "viewTypes": {
        "RSerie": "Rs",
        "RCommon": "Rc",
        "RInline": "Ri",
        "RSerieAndRCommon": "Rs & Rc",
        "RCommonAndRInline": "Rc & Ri",
        "RH": "RH",
        "RHX": "RHX",
        "RX": "RX"
      }
    },
    "settings": {
      "title": "Settings WR Auto",
      "menu": {
        "mainSettings": "Main Settings",
        "temperatures": "Temperatures",
        "advanced": "Advanced"
      },
      "current": "Test Current",
      "measure": {
        "None": "–",
        "RSerie": "Rserie",
        "RCommon": "Rcommon",
        "RInline": "Rinline",
        "RSerieAndRCommon": "Rserie & Rcommon",
        "RCommonAndRInline": "Rcommon & Rinline",
        "RH": "RH",
        "RHX": "RHX",
        "RX": "RX",
        "tapped": {
          "HSide": "Tap Changer Primary",
          "XSide": "Tap Changer Secondary"
        },
        "untapped": {
          "1": "Untapped 1",
          "2": "Untapped 2",
          "3": "Untapped 3"
        }
      },
      "continuousMode": "Continuous Mode",
      "displayWrongValues": "Wrong values",
      "measuredWith": "Meas. Serie with",
      "stabilityCondition": "Stability Condition",
      "maximumDeviation": "Maximum Deviation",
      "externalTemperature": "External Temp.",
      "customCurrent": "Current [A]",
      "probes": "Probes",
      "t1": "T1",
      "t2": "T2",
      "t3": "T3",
      "t4": "T4",
      "t5": "T5",
      "tExternal": "External",
      "tAverage": "Average"
    },
    "printing": {
      "title": "Printing: Winding Resistance",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphMeasuredResults": "Graph Measured Result",
      "graphCorrectedResults": "Graph Corrected Result"
    }
  },
  "magneticBalance": {
    "testVoltage": "Test Voltage",
    "valueModes": {
      "percent": "%",
      "voltage": "V"
    },
    "settings": {
      "title": "Settings MB",
      "frequencyLbl": "Test Frequency",
      "testVoltage": "Test Voltage"
    },
    "table": {
      "phase": "Phase",
      "phases": {
        "a": "\u2192 A",
        "b": "\u2192 B",
        "c": "\u2192 C"
      },
      "iTest": "iTest"
    }
  },
  "drm": {
    "measurementView": {
      "tap": "Tap",
      "phase": "Phase",
      "currentDrop": "Idrop",
      "timeDrm": "Tdrm",
      "timeMotor": "Tmotor",
      "current": "Inrush",
      "currentMotor": "Motor current",
      "acycle": "MCI",
      "asec": "MCI",
      "viewTypes": {
        "DrmDrmView": "DRM",
        "DrmMotorView": "Motor"
      },
      "headers": {
        "tapUp": "Tap up",
        "tapDown": "Tap down"
      }
    },
    "settings": {
      "title": "Settings DRM",
      "menu": {
        "mainSettings": "Main Settings",
        "dynamic": "Dynamic",
        "static": "Static",
        "tcMotor": "TC Motor",
        "temperatures": "Temperatures"
      },
      "continuousMode": "Continuous Mode",
      "continuousModes": {
        "onRequest": "On Request",
        "always": "Always"
      },
      "measuringSides": {
        "measureXSide": "X-Side",
        "measureHSide": "H-Side"
      },
      "frequencies": {
        "DC": "DC",
        "AC50": "AC 50Hz",
        "AC60": "AC 60Hz"
      },
      "stabilityCondition": "Stability Condition",
      "maximumDeviation": "Maximum Deviation",
      "externalTemperature": "External Temp.",
      "customCurrent": "Current [A]",
      "probes": "Probes",
      "t1": "T1",
      "t2": "T2",
      "t3": "T3",
      "t4": "T4",
      "t5": "T5",
      "tExternal": "External",
      "tAverage": "Average",
      "measuringSide": "Measuring Side",
      "connection": "Connection",
      "testCurrent": "Test Current",
      "triggerLevel": "Trigger Level",
      "autoShortCircuit": "Auto Shortcircuit",
      "autoShortCircuitWarning": "Won't record resistance curve",
      "wrMeasurement": "WR Measurement",
      "tcMotorMeasurement": "TC Motor Measurement",
      "workingVoltage": "Working Voltage",
      "frequency": "Frequency",
      "ratedCurrent": "Rated Current",
      "recordTimeTrigger": "Record time",
      "testCurrentWarning": "{{limitTestCurrent}}A and above the LV power supply is used. Max output voltage is 12V!"
    },
    "messages": {
      "increaseCurrent": "Test current too low"
    },
    "noMaxRatedPowerWarning": {
      "title": "Incomplete test object settings",
      "message": {
        "missingRatedVoltagesAndMaxRatedPower": "The <strong>Rated Voltages</strong> in the Electrical Values tab for {{hSideWinding}} or {{xSideWinding}} are incomplete and the <strong>Max Rated Power</strong> value in the Nameplate tab is missing. The resistance curve won't be recorded without Rated Voltages and might be inaccurate without Max Rated Power.<br/><br/>Do you want to continue?",
        "missingRatedVoltages": "The <strong>Rated Voltages</strong> in the Electrical Values tab for {{hSideWinding}} or {{xSideWinding}} are incomplete. The resistance curve won't be recorded if they aren't all provided.<br/><br/>Do you want to continue?",
        "missingMaxRatedPower": "The <strong>Max Rated Power</strong> value in the Nameplate tab is missing. The resistance curve might be inaccurate if not provided.<br/><br/>Do you want to continue?"
      },
      "startAnyway": "Continue anyway"
    }
  },
  "frsl": {
    "corrected": "Corrected",
    "testpointLists": {
      "log": "Logarithm - 15 to 400",
      "linear": "Linear - 15 to 400",
      "high": "High - 20 to 400 stepped"
    },
    "settings": {
      "title": "Settings FRSL",
      "testVoltage": "Voltage",
      "testFrequency": "Frequencies",
      "continuousMode": "Continuous Mode",
      "continuousModes": {
        "onRequest": "On Request",
        "always": "Always"
      },
      "menu": {
        "mainSettings": "Main Settings",
        "temperatures": "Temperatures"
      },
      "addFrequency": "Add test point",
      "testPoint": "Test Point"
    },
    "table": {
      "frequency": "Hz"
    }
  },
  "powerSwitch": {
    "On": "On",
    "Off": "Off",
    "Charge": "Charge",
    "undefined": "?"
  },
  "printing": {
    "inspection": {
      "resultTable": "Result Table",
      "graph": "Graphs",
      "nameplate": "Nameplate"
    },
    "turnsRatio": {
      "title": "Printing: Turns Ratio",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphTurnsRatio": "Graph Turns Ratio",
      "graphVoltageRatio": "Graph Voltage Ratio",
      "actualTrVr": "Actual VR instead TR",
      "graphError": "Graph Error %"
    },
    "trpst": {
      "title": "Printing: Turns Ratio",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphVoltageRatio": "Graph Voltage Ratio",
      "actualTrVr": "Actual VR instead TR",
      "graphError": "Graph Error %"
    },
    "windingResistance": {
      "title": "Printing: Winding Resistance",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphMeasuredResults": "Graph Measured Result",
      "graphCorrectedResults": "Graph Corrected Result"
    },
    "wrpst": {
      "title": "Printing: Winding Resistance",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphMeasuredResults": "Graph Measured Result",
      "graphCorrectedResults": "Graph Corrected Result"
    },
    "windingResistanceInterval": {
      "title": "Printing: Winding Resistance Interval",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphMeasuredResults": "Graph Measured Result"
    },
    "hrt": {
      "title": "Printing: Heat Run Test",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphMeasuredResults": "Graph Measured Result",
      "graphAnalysisResults": "Graph Analysis Result"
    },
    "magneticBalance": {
      "title": "Printing: Magnetic Balance",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "printAbsolutValues": "Print Voltage",
      "pdfRelativeResultTable": "Relative Result Table",
      "pdfAbsoluteResultTable": "Absolute Result Table",
      "graphMeasuredResults": "Graph Measured Result"
    },
    "demagnetization": {
      "title": "Printing: Demagnetization",
      "nameplate": "Nameplate",
      "resultTable": "Result Table",
      "graphMeasuredResults": "Graph Measured Result"
    },
    "shortCircuitImpedance": {
      "title": "Printing: Short Circuit Impedance",
      "nameplate": "Nameplate",
      "resultTablePdf": "Result Zsc/Zm",
      "resultTable": "Results Zsc",
      "resultTable2": "Results Zm",
      "resultOption": "Corrected to Tref"
    },
    "frsl": {
      "title": "Printing: FRSL",
      "nameplate": "Nameplate",
      "resultTable": "Results Table",
      "resultCorrected": "Corrected to Tref",
      "graphMeasuredResults": "Graph Measured Result",
      "graphCorrectedResults": "Graph Corrected Result",
      "graphInductanceResults": "Graph Inductance Result"
    },
    "drm": {
      "title": "Printing: Dynamic Resistance Measurement",
      "nameplate": "Nameplate",
      "resultTablePdf": "Result Table",
      "resultTable": "Results DRM",
      "resultTable2": "Results Motor",
      "graphAllTaps": "Graph All Taps",
      "graphStairs": "Graph Stairs",
      "graphMotor": "Graph Motor",
      "graphSlow": "Graph DRM Extended",
      "graphExtended": "Graph DRM + Motor",
      "graphResistance": "Graph Resistance"
    }
  },
  "results": {
    "noResults": "No results",
    "turnsRatio": {
      "headers": {
        "tap": "{{winding}} Tap",
        "hSideRatedVoltage": "{{winding}} U[V]",
        "xSideRatedVoltage": "{{winding}} U[V]",
        "phase": "Ph.",
        "ratedTr": "Rated TR",
        "actualTr": "TR",
        "ratedVr": "Rated VR",
        "actualVr": "VR",
        "error": "Error [%]",
        "iTest": "ITest [A]",
        "angle": "Angle [°]",
        "pass": "Pass"
      }
    },
    "trpst": {
      "headers": {
        "tap": "{{winding}} Tap",
        "hSideRatedVoltage": "{{winding}} U[V]",
        "xSideRatedVoltage": "{{winding}} U[V]",
        "phase": "Ph.",
        "ratedTr": "Rated TR",
        "actualTr": "TR",
        "ratedVr": "Rated VR",
        "actualVr": "VR",
        "error": "Error [%]",
        "iTest": "ITest [A]",
        "angle": "Angle [°]",
        "pass": "Pass"
      }
    },
    "windingResistance": {
      "headers": {
        "winding": "WS",
        "tap": "Tap",
        "phase": "Ph.",
        "rMeasured": "RMeas [Ω]",
        "rCorrected": "RCorr [Ω]",
        "tCalculated": "TAvg [°{{unit}}]",
        "iTest": "ITest",
        "devMeasured": "DevMeas [%]",
        "devCorrected": "DevCorr [%]",
        "pass": "Pass"
      }
    },
    "wrpst": {
      "headers": {
        "winding": "WS",
        "tap": "{{winding}} Tap",
        "phase": "Ph.",
        "rMeasured": "RMeas [Ω]",
        "rCorrected": "RCorr [Ω]",
        "tCalculated": "TAvg [°{{unit}}]",
        "iTest": "ITest",
        "devMeasured": "DevMeas [%]",
        "devCorrected": "DevCorr [%]",
        "pass": "Pass"
      }
    },
    "windingResistanceInterval": {
      "headers": {
        "winding": "WS",
        "tap": "Tap",
        "phase": "Ph.",
        "resistance": "R [Ω]",
        "temperatureAverage": "TAvg",
        "current": "I [A]",
        "time": "Time",
        "t1": "T1",
        "t2": "T2",
        "t3": "T3",
        "t4": "T4",
        "t5": "T5",
        "tExt": "TExt"
      }
    },
    "hrt": {
      "headers": {
        "winding": "WS",
        "tap": "Tap",
        "phase": "Ph.",
        "resistance": "R [Ω]",
        "time": "Time",
        "t1": "T1",
        "t2": "T2",
        "t3": "T3",
        "t4": "T4",
        "t5": "T5",
        "tWinding": "θwm",
        "tWindingEstimated": "θw",
        "tOil": "θom"
      }
    },
    "magneticBalance": {
      "headers": {}
    },
    "demagnetization": {
      "headers": {
        "phase": "Phase",
        "startCurrent": "Start",
        "cycleNr": "Step",
        "totalCycles": "Total",
        "initialRemanentFlux": "Ф Init.",
        "finalRemanentFlux": "Ф Final",
        "maximalFlux": "Ф Sat.",
        "maximalRemanentFlux": "Ф Max"
      }
    },
    "frsl": {
      "headers": {
        "phase": "Ph.",
        "testFrequency": "Freq. [Hz]",
        "resistance": "R [Ω]",
        "leakageInductance": "L [H]",
        "temperature": "Tavg [°{{unit}}]",
        "resistanceCorrected": "Rcorr [Ω] @{{temp}}°{{unit}}"
      }
    },
    "shortCircuitImpedance": {
      "headers": {
        "tap": "{{winding}} Tap",
        "ratedVoltage": "{{winding}} U [V]",
        "phase": "Ph.",
        "impedance": "Zm [Ω]",
        "resistance": "Rm [Ω]",
        "leakageReactance": "Xm [Ω]",
        "temperature": "Tavg [°{{unit}}]",
        "deviation": "Dev [%]",
        "averageImpedance": "Zsc [Ω]",
        "averageResistance": "Rsc [Ω]",
        "averageLeakageReactance": "Xsc [Ω]",
        "ecc": "Zsc [%]",
        "eccr": "Rsc [%]",
        "ecci": "Xsc [%]"
      }
    },
    "wrAuto": {
      "headers": {
        "winding": "WS",
        "tap": "Tap",
        "phase": "Ph.",
        "rMeasured": "RMeas [Ω]",
        "rCorrected": "RCorr [Ω]",
        "tCalculated": "TAvg [°{{unit}}]",
        "iTest": "ITest [A]",
        "devMeasured": "DevMeas [%]",
        "devCorrected": "DevCorr [%]",
        "pass": "Pass"
      },
      "tapChanger": {
        "HSide": "Tap Changer Pri",
        "XSide": "Tap Changer Sec",
        "None": "Untapped"
      }
    },
    "drm": {
      "headers": {
        "fromTap": "From",
        "toTap": "To",
        "currentDrop": "IDrop [%]",
        "totalDrmTime": "Tdrm [ms]",
        "slope": "Slope [A/s]",
        "slopePercentage": "Slope [%/ms]",
        "iTest": "ITest [A]",
        "motorTotalTime": "Tmotor [s]",
        "motorInrush": "Inrush [A]",
        "motorMciAcycle": "MCI [Acyc]",
        "motorMciASec": "MCI [Asec]",
        "motorDrmDelayTime": "Tdelay [s]"
      }
    },
    "measurementMethods": {
      "TR": "Turns Ratio",
      "WR": "Winding Resistance",
      "DM": "Demagnetization",
      "WRI": "Winding Resistance Interval",
      "MB": "Magnetic Balance",
      "DRM": "Dynamic Resistance Measurement",
      "HRT": "Heat Run Test"
    },
    "viewTypes": {
      "GRAPH": "Graph",
      "TABLE": "Table"
    },
    "viewTitles": {
      "WR-MeasuredGraph": "{{winding}}",
      "WR-CorrectedGraph": "{{winding}} Corr.",
      "WR-Table": "Pri:{{winding}}",
      "WRPS-MeasuredGraph": "Measured",
      "WRPS-CorrectedGraph": "Corrected",
      "WRPS-Table": "Table",
      "TR-Table": "Turns Ratio",
      "TR-TurnsRatioGraph": "Turns Ratio",
      "TR-VoltageRatioGraph": "Voltage Ratio",
      "TR-ErrorGraph": "Error",
      "TRPS-VoltageRatioGraph": "Voltage Ratio",
      "TRPS-ErrorGraph": "Error",
      "TRPS-Table": "Voltage Ratio",
      "WRI-Graph": "{{winding}}",
      "HRT-GraphInterval": "{{title}} Measured",
      "MB-Graph": "Magnetic Balance",
      "MB-Table": "Magnetic Balance %",
      "MB-AbsoluteTable": "Magnetic Balance V",
      "DM-Graph": "Demagnetization",
      "DM-Table": "Demagnetization",
      "WRA-MeasuredGraph": "{{windingPart}} ({{tapChanger}})",
      "WRA-CorrectedGraph": "{{windingPart}} ({{tapChanger}}) Corr.",
      "WRA-Table": "{{windingPart}} ({{tapChanger}})",
      "SCI-PhaseTable": {
        "default": "Zm",
        "corrected": "Zm (corrected)"
      },
      "SCI-TapTable": {
        "default": "Zsc",
        "corrected": "Zsc (corrected)"
      },
      "DRM-TableDrm": "DRM ({{phase}})",
      "DRM-TableMotor": "Motor ({{phase}})",
      "DRM-AllTapsGraph": "DRM All Taps ({{phase}})",
      "DRM-AllSlowTapsGraph": "DRM Extended ({{phase}})",
      "DRM-StairsGraph": "DRM Stairs",
      "DRM-SingleTapGraph": "DRM Single Tap",
      "DRM-ResistanceSingleTapGraph": "R Single Tap",
      "DRM-ExtendedAllTapsGraph": "DRM + Motor ({{phase}})",
      "DRM-ResistanceGraph": "I+R All Taps({{phase}})",
      "FRSL-GraphResistance": {
        "default": "Resistance",
        "corrected": "Resistance Corr."
      },
      "FRSL-GraphInductance": "Inductance",
      "FRSL-Table": "FRSL"
    },
    "viewGroups": {
      "DRM-AllTapsGraph": "DRM All Taps",
      "DRM-ResistanceGraph": "I+R All Taps",
      "DRM-ExtendedAllTapsGraph": "DRM + Motor",
      "DRM-TableDrm": "DRM",
      "DRM-TableMotor": "Motor"
    }
  },
  "tapSelectorDialog": {
    "title": {
      "default": "Select Tap",
      "0": "Select Primary Tap",
      "1": "Select Secondary Tap",
      "2": "Select Tertiary Tap"
    },
    "taps": "Tap",
    "first": "First",
    "middle": "Middle",
    "last": "Last"
  },
  "temperatureDialog": {
    "title": "Temperatures"
  },
  "temperatures": {
    "t1": "T1",
    "t2": "T2",
    "t3": "T3",
    "t4": "T4",
    "t5": "T5",
    "tExt": "External",
    "tAverage": "Average"
  },
  "sort": {
    "nameAsc": "Name Asc",
    "nameDesc": "Name Desc",
    "mostRecent": "Most Recent",
    "leastRecent": "Least Recent",
    "configurationAsc": "Configuration Asc",
    "configurationDesc": "Configuration Desc"
  },
  "trafodetect": {
    "title": "Transformer Detect",
    "check": "Check {{para0}}",
    "terminalCon": "{{para0}} Connected",
    "terminalNotCon": "{{para0}} not Connected ",
    "terminalConEarth": "{{para0}}-Side connected to Earth"
  },
  "devicemessage": {
    "exception": "Error",
    "error": "Error",
    "warning": "Warning",
    "info": "Info",
    "empty": "",
    "emergencyPressed": "Emergency Pressed",
    "tempProbeMissing": "Temperature Probe {{para1}} missing",
    "testSetup": "Test Setup",
    "poorConnection": "Check Terminal {{para0}}",
    "currentProbeMissing": {
      "title": "Check current Probe",
      "text": "missing / open ?"
    },
    "drmMotorTriggerMissing": {
      "title": "Motor Trigger missing!",
      "text": "Check rated motor current"
    },
    "drmDRMTriggerMissing": {
      "title": "DRM Trigger missing!",
      "text": "Check DRM Trigger Level"
    },
    "protectActivated": "Protection Circuit activated",
    "trOvercurrent": "Overcurrent",
    "checkTrafoSetup": "Check Trafo Setup",
    "checkTestSetup": "Check Test Setup",
    "checkTrafoSetupHX": "Check Trafo Setup H<->X",
    "checkTrafoSetup2PS": "Check Test Setup, use Secondary mode with Primary Charge",
    "restartMeasurement": "Restart Measurement",
    "calibStarted": "Calibration started",
    "PSnotReady": "PS not ready!"
  },
  "printingDialog": {
    "all": "All",
    "none": "None",
    "preview": "Preview",
    "print": "Print",
    "export": "Export",
    "generate": "Generate",
    "inspection": {
      "PDF": {
        "title": "Generate Pdf - Inspection"
      }
    },
    "turnsRatio": {
      "PDF": {
        "title": "Generate Pdf - Turns Ratio"
      },
      "THERMAL": {
        "title": "Thermal Print - Turns Ratio"
      }
    },
    "windingResistance": {
      "PDF": {
        "title": "Generate Pdf - Winding Resistance"
      },
      "THERMAL": {
        "title": "Thermal Print - Winding Resistance"
      }
    },
    "wrpst": {
      "PDF": {
        "title": "Generate Pdf - Winding Resistance"
      },
      "THERMAL": {
        "title": "Thermal Print - Winding Resistance"
      }
    },
    "hrt": {
      "PDF": {
        "title": "Generate Pdf - Heat Run Test"
      },
      "THERMAL": {
        "title": "Thermal Print - Heat Run Test"
      }
    },
    "windingResistanceInterval": {
      "PDF": {
        "title": "Generate Pdf - Winding Resistance Interval"
      },
      "THERMAL": {
        "title": "Thermal Print - Winding Resistance Interval"
      }
    },
    "magneticBalance": {
      "PDF": {
        "title": "Generate Pdf - Magnetic Balance"
      },
      "THERMAL": {
        "title": "Thermal Print - Magnetic Balance"
      }
    },
    "wrAuto": {
      "PDF": {
        "title": "Generate Pdf - Winding Resistance"
      },
      "THERMAL": {
        "title": "Thermal Print - Winding Resistance"
      }
    },
    "demagnetization": {
      "PDF": {
        "title": "Generate Pdf - Demagnetization"
      },
      "THERMAL": {
        "title": "Thermal Print - Demagnetization"
      }
    },
    "shortCircuitImpedance": {
      "PDF": {
        "title": "Generate Pdf - Short Circuit Impedance"
      },
      "THERMAL": {
        "title": "Thermal Print - Short Circuit Impedance"
      }
    },
    "drm": {
      "PDF": {
        "title": "Generate Pdf - Dynamic Resistance Measurement"
      },
      "THERMAL": {
        "title": "Thermal Print - Dynamic Resistance Measurement"
      }
    },
    "frsl": {
      "PDF": {
        "title": "Generate Pdf - Freq. Response Stray Losses Measurement"
      },
      "THERMAL": {
        "title": "Thermal Print - Freq. Response Stray Losses Measurement"
      }
    }
  },
  "testPlans": {
    "0": {
      "pdfDialog": "Test Plan - Pri:Sec"
    },
    "1": {
      "pdfDialog": "Test Plan - Pri:Ter"
    }
  },
  "numberRange": {
    "maxExceeded": {
      "title": "Input exceeds maximum",
      "text": "The allowed maximum value is {{value}}"
    },
    "minBelow": {
      "title": "Input below minimum",
      "text": "The allowed minimum value is {{value}}"
    }
  },
  "licenseManager": {
    "license": "License",
    "addLicense": "Add New License",
    "validity": "Validity",
    "dialog": {
      "title": "Add new License",
      "licenseKey": "License Key"
    },
    "unlimited": "Unlimited",
    "expired": "Expired",
    "notLicensed": "Not licensed",
    "days": "{{days}} days",
    "options": {
      "Firmware": "Firmware",
      "AutomaticHeatRunTest": "Automatic Heat Run Test",
      "FrequencyResponseOfStrayLosses": "Frequency Response of Stray Losses",
      "ShortCircuitImpedance": "Short Circuit Impedance",
      "DynamicResistanceMeasurement": "Dynamic Resistance Measurement"
    }
  },
  "processing": {
    "calibDueDate": {
      "title": "Update Calibration Due Date",
      "label": "Date"
    }
  },
  "tciMeter": {
    "label": "Imbalance (TCI)"
  },
  "goTapDialog": {
    "title": "Go Taps",
    "taps": "Taps",
    "fromLabel": "From",
    "toLabel": "To",
    "automatic": "Automatic",
    "manual": "Manual",
    "phase": "Phase",
    "currentTapLabel": "Actual Position",
    "currentTap": "Tap {{tap}}",
    "direction": {
      "direction": "Direction",
      "up": "To Tap {{tap}} (+)",
      "down": "To Tap {{tap}} (-)"
    },
    "autoreverse": {
      "label": "Auto Reverse",
      "on": "On",
      "off": "Off"
    },
    "tapChanging": "Tap Changing"
  },
  "tapSwitchDialog": {
    "title": "Tap Switch",
    "manual": {
      "message": {
        "line1": "Please change the {{winding}} tap position",
        "line2": "and confirm after finishing",
        "drm": "Change tap position from {{fromTap}} to {{toTap}}"
      }
    },
    "automatic": {
      "message": {
        "line1": "Changing {{winding}} tap position",
        "drm": "Auto changing tap from {{fromTap}} to {{toTap}}"
      },
      "tapWillBeChangedIn": "Waiting for the tap changing: {{remainingSeconds}}s"
    }
  },
  "liveGraph": {
    "title": "Live Graph",
    "timeSecond": "Time [s]"
  },
  "frslTestpointDialog": {
    "title": "Frequencies",
    "settings": {
      "testFrequency": "Test Points"
    }
  },
  "manualSettingsPage": {
    "cta": "Scan the QR Code to download the manual",
    "downloadLink": "or click here to open the manual in a new window"
  },
  "testObjectBasicForm": {
    "phaseShiftToggle": {
      "label": "Enable Phase Shifting"
    }
  },
  "testObjectTapControl": {
    "setTapPositions": {
      "button": "Set Tap Positions",
      "dialogTitle": "Set Tap Positions",
      "primary": "Primary Tap",
      "secondary": "Secondary Tap",
      "tertiary": "Tertiary Tap"
    },
    "goTap": {
      "button": "Go Tap",
      "dialogTitle": "Go Tap",
      "windingsLabel": "Winding",
      "currentTap": "Current Tap",
      "goTap": "Go Tap",
      "tapSelectorDialogTitles": {
        "currentTap": "Select Current Tap",
        "goTap": "Select Go Tap"
      }
    },
    "changeTap": {
      "dialogTitle": "Changing Tap",
      "message": "Changing {{winding}} tap position",
      "remainingPulseTime": "Remaining pulse time: {{time}}",
      "remainingTransitionTime": "Remaining transition time: {{time}}",
      "finishingTransition": "Finishing Transition"
    }
  },
  "autoDetect": {
    "connections": {
      "1": "Pri:Sec",
      "2": "Pri:Ter"
    }
  },
  "defaultError": {
    "title": "Error",
    "message": "Something went wrong. Action could not be completed."
  },
  "logout": {
    "title": "Logout",
    "message": "Are you sure you want to logout?"
  },
  "authError": {
    "title": "Session expired",
    "message": "Your session has expired, please make sure to authenticate"
  },
  "confirmCancelUnsavedChanges": {
    "title": "Discard changes",
    "message": "You have unsaved changes, do you want to discard them?"
  },
  "confirmSave": {
    "title": "Save changes?",
    "message": "Do you want to save your changes?"
  },
  "confirmCreateTemplate": {
    "title": "Create template?",
    "message": "If you save, you won't be able to make changes to the windings settings anymore."
  },
  "confirmCreateTestObject": {
    "title": "Create test object?",
    "message": "If you save, you won't be able to make changes to the windings settings anymore."
  },
  "confirmUpdate": {
    "title": "Update mini-ATOS?",
    "message": "Attention, the device will restart after confirmation and all unsaved changes will be lost."
  },
  "confirmDiscard": {
    "title": "Discard changes?",
    "message": "All unsaved changes will be lost."
  },
  "confirmAbortCreateTemplate": {
    "title": "Please confirm",
    "message": "Template has not been created yet. Are you sure you want to leave?"
  },
  "confirmAbortCreateTestObject": {
    "title": "Please confirm",
    "message": "Test object has not been created yet. Are you sure you want to leave?"
  },
  "confirmDelete": {
    "title": "Delete entry?",
    "message": "The entry and everything that is part of it will be deleted."
  },
  "confirmDeleteMultiple": {
    "title": "Delete {{amount}} entries?",
    "message": "The {{amount}} entries and everything that is part of them will be deleted."
  },
  "confirmWarnDeleteMultiple": {
    "title": "Please confirm",
    "message": "Do you want to delete the {{amount}} entries? The amount you selected may take some time to process"
  },
  "confirmExport": {
    "title": "Please confirm",
    "message": "Do you want to export the selected entry?"
  },
  "confirmExportMultiple": {
    "title": "Please confirm",
    "message": "Do you want to export the {{amount}} entries?"
  },
  "confirmWarnExportMultiple": {
    "title": "Please confirm",
    "message": "Do you want to export the {{amount}} entries? The amount you selected may take some time to process"
  },
  "confirmDeleteFile": {
    "title": "Confirm Deletion",
    "message": "Do you want to delete '{{name}}'?"
  },
  "confirmClone": {
    "title": "Please confirm",
    "message": "Do you want to clone the selected entry?"
  },
  "invalidInput": {
    "title": "Invalid input",
    "message": "Your input is invalid, please make sure all required data is set correctly"
  },
  "confirmCreateTestPlan": {
    "title": "Please confirm",
    "message": "Do you want to create a new inspection with this test plan?"
  },
  "confirmExportLogs": {
    "title": "Please confirm",
    "message": "Do you want to save the logs to your USB device?"
  },
  "confirmCreateTemplateFromTestObject": {
    "title": "Please confirm",
    "message": "Do you want to create a template from the test object?"
  },
  "confirmImport": {
    "title": "Import file",
    "message": "Do you want to import test objects from '{{name}}'?"
  },
  "confirmOverwriteFile": {
    "title": "File already exists",
    "message": "'{{name}}' already exists. Overwrite file?"
  },
  "fileImported": {
    "title": "Success",
    "message": "Test objects successfully imported"
  },
  "importError": {
    "title": "Import with Issues",
    "message": "Something went wrong during the import. Some data might not have been changed."
  },
  "fileExported": {
    "title": "Success",
    "message": "File successfully exported"
  },
  "confirmFinishEditTemplate": {
    "title": "Please confirm",
    "message": "Are you finished working on this template?"
  },
  "confirmInstantDeleteMeasurementResults": {
    "title": "Please confirm",
    "message": "Update requires to delete existing measurement results, do you want to delete the results now?"
  },
  "confirmUpdateMeasurementWithResults": {
    "title": "Please confirm",
    "message": "Update requires to delete existing measurement results, do you want to delete the results as soon as test plan changes are saved?<br>Please choose wether:<ul><li>Confirm: Changes are applied and results are going to be deleted</li><li>Duplicate: Duplicate will be created with the changes</li><li>Ignore: Changes will be applied</li></ul>"
  },
  "confirmDeleteMeasurementResults": {
    "title": "Please confirm",
    "message": "Do you want to delete the results as soon as test plan changes are saved?"
  },
  "confirmPrinting": {
    "title": "Please confirm",
    "message": "Do you want to print the measurement results for actual tap position?"
  },
  "action": {
    "inProgess": "Action in progress...",
    "usbEjected": "USB ejected"
  },
  "remoteConnected": {
    "stop": "Stop remote access",
    "title": "Remote client connected"
  },
  "reconnected": {
    "title": "Reconnected",
    "message": "Device successfully reconnected"
  },
  "reconnecting": {
    "title": "Connection lost",
    "message": "Connection has been lost. Trying to reconnect..."
  },
  "connectionFailed": {
    "title": "Connection failed",
    "message": "Connection could not be established!"
  },
  "connectionLost": {
    "title": "Connection lost",
    "message": "Connection to server could not be reestablished!"
  },
  "emptyTestPlanNotAllowed": {
    "title": "Cannot save",
    "message": "Please add at least one measurement method to the test plan"
  },
  "exportLogs": {
    "title": "Export Logs",
    "success": "Logs successfully exported",
    "failed": "Unable to export logs"
  },
  "forbidError": {
    "title": "Forbidden",
    "message": "Action cannot be executed"
  },
  "serviceCodeSuccess": {
    "title": "Success",
    "message": "Service code executed"
  },
  "lostDateError": {
    "title": "Lost date",
    "message": "The device date is not valid anymore, please update the device date in the settings"
  },
  "deleteInspection": {
    "title": "Delete Inspection",
    "message": "Do you want to delete the selected inspection and its results?"
  },
  "remoteDeviceTimeDifference": {
    "title": "Time Difference",
    "message": "The date/time of the mini-ATOS does not match the date/time of your device.",
    "applyMessage": "Apply your time to the device"
  },
  "invalidFirmwareLicense": {
    "title": "Invalid Firmware License",
    "message": "Your firmware license is either expired or not valid anymore"
  },
  "firmwareLicenseExpiringSoon": {
    "title": "Firmware License",
    "message": "Your firmware license is going to expire in {{days}} days"
  },
  "firmwareLicenseExpired": {
    "title": "Firmware License",
    "message": "Your firmware license is expired"
  },
  "licenseError": {
    "title": "No valid license",
    "message": "Action cannot be executed since there is no valid registered license. Please add a valid license"
  },
  "invalidPowerSupplies": {
    "title": "Invalid Power Supplies",
    "message": "Measurement cannot be started with the selected power supply setup. Make sure at least one supply is set to \"On\""
  },
  "invalidFileName": {
    "title": "Invalid File Name",
    "message": "You provided an invalid file name. Please make sure you only use legal file name characters"
  },
  "confirmStopTimer": {
    "title": "Stop Timer",
    "message": "Do you want to stop the timer?"
  },
  "confirmStartTimer": {
    "title": "Start Timer",
    "message": "There are already results.<br/>Do you want to start the timer and delete the existing results?"
  },
  "askDeleteMeasurementResults": {
    "title": "Delete Results",
    "message": "Do you want to delete existing results or append new results?"
  },
  "askStartMeasurementWithResultsAndTimer": {
    "title": "Timer Restarted, Delete Results",
    "message": "The timer does not match with the existing results. <br/>Do you want to delete existing results?"
  },
  "remoteHelpDialog": {
    "title": "Remote Access Help",
    "networkTitle": "Network (Ethernet)",
    "usbTitle": "USB",
    "networkSteps": {
      "setup": {
        "title": "Setup",
        "first": "Connect the mini-ATOS to an already existing network.",
        "second": "Make sure the mini-ATOS is connected to the same network as the device you want to connect with."
      },
      "mATOS": {
        "title": "On the mini-ATOS",
        "first": "In the settings under Network, note the hostname.",
        "second": "In the settings under Remote Access, set your prefered settings.",
        "third": "Logout through the main menu.",
        "fourth": "Activate Remote Access."
      },
      "device": {
        "title": "On your device",
        "first": "Open a browser (preferably chrome) and connect to: ",
        "second": "Login with the code displayed on the mini-ATOS or the code you've set in the settings.",
        "hostname": "your mini-ATOS hostname"
      }
    },
    "usbSteps": {
      "setup": {
        "title": "Setup",
        "first": "Connect your mini-ATOS to your device."
      },
      "mATOS": {
        "title": "On the mini-ATOS",
        "first": "In the settings under Remote Access, set your prefered settings.",
        "second": "Logout through the main menu.",
        "third": "Activate Remote Access."
      },
      "device": {
        "title": "On your device",
        "first": "Open a browser (preferably chrome) and connect to: ",
        "second": "Login with the code displayed on the mini-ATOS or the code you've set in the settings."
      }
    }
  },
  "deviceTestDialog": {
    "running": "Running",
    "selected": "Selected Test Types",
    "confirmNoExportExit": {
      "title": "Result Not Exported",
      "message": "You have not exported the test results. Are you sure you want to leave?"
    }
  },
  "selfTestDialog": {
    "title": "Self Tests",
    "cableMapping": "Please map the cables for the miniAtos device as described",
    "selectAll": "Select All"
  },
  "builtInTestDialog": {
    "title": "Built-in Tests",
    "cableMapping": "Do not connect any measuring cables to the unit",
    "selectAll": "Select All"
  },
  "validation": {
    "invalid": "Invalid",
    "required": "Required",
    "invalidIp4": "Invalid IPv4",
    "invalidNetmask": "Invalid netmask",
    "invalidAccessCode": "Code must be exactly six digits long",
    "invalidFileName": "Invalid filename",
    "minMax": "Range: {{min}}{{unit}} to {{max}}{{unit}}",
    "min": "Allowed min: {{min}}{{unit}}",
    "max": "Allowed max: {{max}}{{unit}}",
    "minLength": "Min length: {{min}}",
    "maxLength": "Max length: {{max}}",
    "notAllNone": "At least one measurement required",
    "frequencyRequired": "At least one test point required",
    "pulseLargerThanMaxTransition": "Pulse > Max Transition",
    "goToSameTapIndex": "Can't go from tap {{fromTap}} to tap {{toTap}}"
  }
}
